Hey, just as a update, I received firmware 1.0.2 yesterday for my iPod classic. I'm not sure if this news is related
Dilip Kumar S
· 2 years ago
I recently took an iPhone from USA , I have done all the unlocking process . I made a duplicate file of cd /System/Library/Frameworks/CoreTelephony.framework/Support/O2_UK .plist and changed the name to Airtel_In.plist. Then I made the necessary changes in the string for the string for MCCMNC code ie 40406, 40402, 40410 . Then I ran the command ln -s Airtel_In.plist , This phone is in India , and the phone seems to be rebooting and with lots of crashes report in logs mainly on the spring boards . Now all i need to do is revirginise and do all the process again. Itunes is not detecting the iphone when plugged to the computer. Please let me know on this I am kind of worried with iphone getting bricked or is it bricked . First my firmware was 1.1 and then later i installed opto application and updated to 1.1.2 and then made those steps . Please find the steps what i followed . I am able to enter the iphone from Winscp and ssh. Regards Dilip
owngrade to 1.1.1 (lots of guides around, follow them)
- I noticed that AppSnap won't work if iTunes doesn't see the iphone 1st. Like an initial "sync" is needed. Then you can just close it. - After jailbreak, install package Oktoprep from Installer>Tweaks(1.1.1)
Upgrade to 1.1.2
- Click on upgrade in iTunes and go get some coffee
Jailbreak 1.1.2
- So, right now you should have a nice 1.1.2 activate screen talking in tongues. As a rule of thumb, just open iTunes and let it detect the iPhone then close it. - Now run windows.bat from the 1.1.2 jailbreak and check option Install ssh, change password if needed and click Jailbreak - Might take like 5-10 mins, more coffee maybe?
Activate 1.1.2
- By now you should have rebooted your phone and you're back at the 1.1.2 active screen - Run winscp, put necessary info (ip address, usr/pwd, let it on SFTP in the protocol) and click connect - Now go to /usr/libexec/ and make a backup of lockdownd on your pc(we NEVER know) - Unzip the patched lockdownd and put in /usr/libexec/ - Click on "more", set permissions 0755 (so check all Xs, you'll figure it out) - Click ok, and overwrite the existing lockdownd - Reboot your phone
Carrier settings *optional* (For those who wanna sexy up that iphone )
- Winscp to your phone and put ls and bash in /bin - Click on "more", set both permissions to 0755 - Check here for your carrier's MCC and MNC (it's not as hard as it sounds)
e.g MCC = 334 MNC = 02, the number we'll need is 33402
- Open the Telcel.plist in UltraEdit or wordpad and modify accordingly (Don't forget to rename your .plist file & change the supported sim section) - Use winscp to put the modified .plist to /System/Library/Frameworks/CoreTelephony.framework/Support/ - Open putty and connect to your phone - Type bash at the prompt - Type cd /System/Library/Frameworks/CoreTelephony.framework/Support - Type ln -s YOURCARRIER.plist NUMBER
All Comments
I made a duplicate file of cd /System/Library/Frameworks/CoreTelephony.framework/Support/O2_UK .plist and changed the name to Airtel_In.plist.
Then I made the necessary changes in the string for the string for MCCMNC code ie 40406, 40402, 40410 . Then I ran the command
ln -s Airtel_In.plist , This phone is in India , and the phone seems to be rebooting and with lots of crashes report in logs mainly on the spring boards . Now all i need to do is revirginise and do all the process again. Itunes is not detecting the iphone when plugged to the computer.
Please let me know on this I am kind of worried with iphone getting bricked or is it bricked . First my firmware was 1.1 and then later i installed opto application and updated to 1.1.2 and then made those steps . Please find the steps what i followed . I am able to enter the iphone from Winscp and ssh.
Regards
Dilip
owngrade to 1.1.1
(lots of guides around, follow them)
- I noticed that AppSnap won't work if iTunes doesn't see the iphone 1st. Like an initial "sync" is needed. Then you can just close it.
- After jailbreak, install package Oktoprep from Installer>Tweaks(1.1.1)
Upgrade to 1.1.2
- Click on upgrade in iTunes and go get some coffee
Jailbreak 1.1.2
- So, right now you should have a nice 1.1.2 activate screen talking in tongues. As a rule of thumb, just open iTunes and let it detect the iPhone then close it.
- Now run windows.bat from the 1.1.2 jailbreak and check option Install ssh, change password if needed and click Jailbreak
- Might take like 5-10 mins, more coffee maybe?
Activate 1.1.2
- By now you should have rebooted your phone and you're back at the 1.1.2 active screen
- Run winscp, put necessary info (ip address, usr/pwd, let it on SFTP in the protocol) and click connect
- Now go to /usr/libexec/ and make a backup of lockdownd on your pc(we NEVER know)
- Unzip the patched lockdownd and put in /usr/libexec/
- Click on "more", set permissions 0755 (so check all Xs, you'll figure it out)
- Click ok, and overwrite the existing lockdownd
- Reboot your phone
Carrier settings *optional* (For those who wanna sexy up that iphone )
- Winscp to your phone and put ls and bash in /bin
- Click on "more", set both permissions to 0755
- Check here for your carrier's MCC and MNC (it's not as hard as it sounds)
e.g MCC = 334 MNC = 02, the number we'll need is 33402
- Open the Telcel.plist in UltraEdit or wordpad and modify accordingly (Don't forget to rename your .plist file & change the supported sim section)
- Use winscp to put the modified .plist to /System/Library/Frameworks/CoreTelephony.framework/Support/
- Open putty and connect to your phone
- Type bash at the prompt
- Type cd /System/Library/Frameworks/CoreTelephony.framework/Support
- Type ln -s YOURCARRIER.plist NUMBER
e.g ln -s Telcel.plist 302370